Automated Rebar Layout for Corewalls | ProtaStructure 2024 & ProtaDetails 2024
ProtaStructure enables
users to edit rebar layout of corewalls and polyline columns both automatically
and manually. In the previous versions of ProtaStructure, the rebar layout of
the core walls with known shapes was parametrically done (sections like U, I,
T, E, L). For unclassified complex shapes, only the bars at the link corners
were put and intermediate regions were left empty. #ProtaStructure 2024 is
capable of putting reinforcements automatically both in the end zones and
intermediate regions.
In this webinar, Mr.
Volkan Öğüt explained how to take advantage of this capability of the ProtaStructure
through a live demonstration. By watching this webinar, you will learn how to
start a new project in ProtaStructure, how to perform modeling, analysis, and
design processes, and how to obtain the detail drawings automatically.
Webinar Topics- How to Create a New Project in ProtaStructure
- How to Model RC Members (Columns, Corewalls and Beams)
- How to Manage Loads & How to Insert Slabs
- How to Model Cantilever Slabs
- How to Perform the Building Analysis & Check the Results on Analytical Model
- How to Design RC Columns and Beams
- How to Utilize the Polyline Column Editor
- How to Create Column Elevation Drawings with ProtaDetails
- How to Create Shearwall Elevation Drawings with ProtaDetails
- How to Obtain Quantity Table with ProtaDetails
- How to Export the Drawings in DWG Format