Composite Beam Design General Principles
ProtaStructure supports a powerful composite slab/beam design. The overview of the composite slab modeling, analysis, and design is as follows:
1. Metal decks can be chosen from a Metal Deck Library.
2. Shear studs can be specified from a Stud Library.
3. Primary and Secondary Composite Frames can be modeled freely to create any structural layout.
4. Composite Slab can be inserted on top of primary and secondary frames using flexible methods.
5. The effective widths of composite frames are automatically calculated, and load distribution is automatically done.
6. Transformed section properties are automatically calculated.
7. The Construction Stage and Final Composite Stage analysis are automatically performed considering construction stage imposed loads, final stage imposed loads, dead loads, etc. Different mechanical properties and end conditions are automatically considered in these analyses.
8. Steel profile checks and deflection checks are done in the construction stage.
9. The composite design is done according to a default Composite Action Ratio. You can change this ratio and optimize your design.
10. Uniform or Segmented Stud Layout can be used depending on the moment diagram of the member. You have complete control over the designed shear studs.
11. Checks are done for the mesh reinforcement inside the topping concrete.
12. Final deflection and vibration checks are done.
13. AISC360, Eurocode 4, and Turkish Steel Design codes are currently supported.
14. Composite frame sections and layout can be easily changed and optimized.
This design guide outlines the detail steps, consideration and scope of this feature.
You will also find it helpful to watch these videos :
Related Articles
How to Model Composite Beams/Slabs with ProtaStructure
The top-rated request from our users was the ability to design composite slabs with profiled metal decks. We listened to our users, and this feature now complements the steel design solution offered in ProtaStructure. You can easily model primary and ...
How to Analyze & Design Composite Beams/Slabs
The top-rated request from our users was the ability to design composite slabs with profiled metal decks. We listened to our users, and this feature now complements the steel design solution offered in ProtaStructure. After modeling your composite ...
Steel Design & Composite Member Settings
Steel design & composite member setting is important to preset before starting to design any steel or composite steel members. By presetting these design parameters can save a significant amount of time for user compare to user who set after ...
Working with Castellated Beam
A castellated beam is created by slicing an I-beam longitudinally along its web in a specific pattern. The goal is to separate and then rejoin the beam with a deeper web. These beams are categorized based on the shape of the openings in the web ...
Staged Construction Analysis
Introduction Staged construction analysis is a sophisticated method of solution which, if used with a reasonable degree of care can more closely reflect the real behaviour of the structure. A standard 3D analysis takes no account of time dependant ...