Displacement Based Assessment and Design with ProtaStructure Opensees Integration
Displacement Based Assessment and Design with ProtaStructure Opensees Integration
Displacement Based Assessment and Design is always challenging issue for structural engineers. ProtaStructure-OpenSees integration provides new features for non-linear analysis of structures.
In the video that is given below, you will learn how to install opensees and how to use Pushover and Time History Analysis features of ProtaStructure.
You can download the latest of Opensees.exe from here:
Opensees (You need to register an account first)
Topics: Modeling of Existing Buildings Selection of Seismic Parameters correctly Corrosion Factors Overview of Assessment Interface Building Information Level Rebar Realization Factors Examination of Assessment Reports Retrofitting ...
The “Nonlinear Analysis” feature in ProtaStructure enables the user to perform nonlinear analysis methods such as Pushover Analysis and Time-History Analysis. In the attached documents, target displacement calculation for nonlinear pushover analysis ...
Performance-based design is a process that enables the development of structures that will have predictable performance when subjected to defined loading. Performance-based design (PBD) turns the traditional design paradigm upside down in the sense ...
ProtaStructure requires OpenSees to perform non-linear Time History Analysis & Pushover Analysis. If OpenSees is not installed, the program will show the warning as shown in the figure below: ProtaStructure 2025 & later Steps to install OpenSees: 1) ...
ASCE/SEI 41-17—“Seismic Evaluation and Retrofit of Existing Buildings”—is the industry standard for assessing seismic performance in existing structures. Moreover, it uses performance-based design principles. Consequently, the standard defines a ...