FE Analysis of Foundations Overview
The foundation system is modelled in the Graphic Editor and can comprise of mats, piled rafts, pads, pile caps and strip footings. All of these foundation types can be analysed in the FE Raft Foundation Analysis module.
Prior to FE Raft Foundation analysis, it’s necessary to complete the structural analysis to determine the loads to be used in the raft foundation analysis.
FE Raft Foundation Analysis is only available at the foundation storey. It is accessed by selecting "FE Raft Foundation Analysis" from the "Analysis" Tab.
The form is composed of the following pages:
- Finite Elements Raft Foundation Analysis: The Finite Element model is generated and analysed from here using the selected parameters by clicking the “Floor Mesh and Analysis” button
.
- Post Analysis Processes and Reports: This page is used for visualizing and reporting the displacements and forces obtained from the analysis.
- SAP 2000 Analysis Model Export (Optional): This page can be used for transferring the FE model to other analysis packages.
Please refer example below for more understanding:
- Raft Foundation and Piled Raft Foundation Analysis & Design Example
- Punching Shear Check for Raft Foundation
Related Articles
Raft Foundation and Piled Raft Foundation Analysis & Design Example
Raft Foundation Example This example is based on the "Quick Start Guide Concrete Complete" model which is automatically installed in the default ProtaDataXXXX folder. In this example we will be inserting a raft foundation and then piled raft ...Finite Elements Raft Foundation Analysis
FE Raft Foundation Analysis is only available at the foundation storey (ST-00). It can be accessed by clicking “ FE Raft Foundation Analysis” from the “ Analysis” tab. Prior to FE Raft Foundation Analysis, it is necessary to complete Building ...Building Analysis Overview
Having modeled your structure and defined the parameters/loading to be applied, you are now ready to generate the member design forces. These are determined by performing a 3D analysis of the whole building. The pre and post analysis stages, along ...Model Options
Options to be used in analysis can be specified in “Model Options” page of “Building Analysis” form. “Model Options” comprises of four tab pages namely, Model, Shear Wall Model, Slab Model, and Settings. Any modifications made in this page can be ...Flat Slab Modelling, Analysis and Design Guide
This design guide discusses the modeling, analysis and design of flat slab model in detail at here: Flat Slab Training Manual Users who wish to understand the modeling, analysis and design for flat slab model are recommended to read this document. ...