How to use mesh reinforcement / BRC for shear wall design
To use mesh reinforcement / BRC for shear wall design, these are the steps :
In Building Analysis menu > Edit Materials > Concrete Wall > Longitudinal Web Bar > Pick a Fabric Rebar
Click Rebar Diameters and choose the diameter to be used in the design
For more details of material settings, kindly refer to Material.
Go to Column Design Settings > Review the Mesh Steel settings to your preference
In the Column Reinforcement Design Batch mode > check “Try Using Mesh Reinforcement in All Walls”
Perform a “Re-select All Bars” design.
If mesh reinforcement solution can’t be found, the design will revert to loose bar.Related Articles
How to use mesh reinforcement / BRC for slab design
To use mesh reinforcement / BRC for slab design, these are the steps : In Building Analysis menu > Edit Materials > Slabs > Pick a Fabric Rebar Click Rebar Diameters and choose the diameter to be used in the design Click Slab Analysis and Design > ...Column and Wall Design Overview
Column and Wall are the significant vertical structural members in a building structure. Column Reinforcement Design Tab can be loaded by selecting the "Columns" under the Design tab. Design settings of columns and walls are explained in detail in ...Define Merged Wall/Irregular column Reinforcement in Polyline Column Editor
Define Merged Wall Reinforcement in Polyline Column Editor Step 1: Select the merged RC walls on plan view > Right click > Polyline wall editor. Kindly note that if you have run building analysis, it's also possible to access this polyline column ...Rebar Anchorage and Lap Lengths
ProtaDetails is capable of calculating lap and anchorage lengths according to several building codes around the world. This document presents detailed lap and anchorage length calculations for different building codes with case studies. Reinforcement ...Column and Wall Design Contents
The "Column Section Design" form can be accessed by clicking the “Column Section Design” option under the “Design” pulldown menu in the Graphic Editor. ProtaStructure can design rectangular, circular and polyline columns under uniaxial or biaxial ...