ProtaStructure: IFC and DXF Import

ProtaStructure: IFC and DXF Import

This document shows how you can take advantage of importing IFC, 2D, and 3D DXF and analytical data into ProtaStructure to start or enhance your project models quickly.

    • Related Articles

    • IFC and DXF Import Guideline

      Before starting a new model, you may like to have the Architectural plan (or the preliminary structural plan) to be displayed as reference to facilitate the creation of axes and structural members. The objects in the drawing are also recognized by ...

    • Three Ways to Start Structural Modeling in ProtaStructure 2024

      From architectural drawings to engineering drawings, project delivery is a long process. In this video, you will learn three different ways to start structural modeling in ProtaStructure that will accelerate your modeling process. One of the methods ...

    • Import Titleblock for General Drawing

      User can simply import company standard titleblock as DXF in "Drawing Module" by going to "BIM" top menu > Import DXF (Make sure that the titleblock is not in block.) Select the company standard titleblock DXF directory. Titleblock annotation can be ...

    • Drawing Module

      ProtaSteel has a powerful tool to prepare engineering drawings – it’s simply called the “Drawing module”. The drawings are based on the views prepared in the modelling module. The steps are summarized as below : 1. Create the desired View in Model ...

    • ProtaStructure Basic Training Guide

      Thank you for choosing ProtaStructure. This Basic Training Guide aims to get you up and running quickly. Starting from an introduction to the interface, this guide explains how to create, analyze and design a model step-by-step. You should be able to ...