Isolate / Unisolate Storey

Users can isolate storey in the 3D view, allowing for clearer visualization of the members on the active storey.

To isolate a storey, right-click anywhere in the 3D view, then select 'Isolate/Unisolate Storey'. After that, only the active storey will be visible in the 3D view. 

Alternatively, user can use the shortcut button of (Alt+Left) to isolate the storey.

• Related Articles

• Show/Hide Selected Members

  Sometimes, when the model is too crowded, it may not be easy to concentrate on the portion of the structure that you want to work on. A truss or purlin might get between the camera and the object of interest. To help with this, users can use ...

• 3-D View & Visual Interrogation

  Multiple 3D Views of the model can be concurrently made active by going to "Views" Tab > 3D Physical Model. Alternatively, right click the “Views” in the structure tree and select the “3D view”. A 3-D perspective view of the whole model can be ...

• How to show transfer or discontinuous columns and Walls on Plan view

  To show show transfer/ discontinuous columns and walls on plan view of the transfer storey : 1. Click on Visual Interrogation in Review tab 2. Select Column Plan Display 3. Tick Display Transfer Columns and Walls on Plan Example Model The below is a ...

• Member Related Controls

  Member Selection Before you can edit objects, you need to create a selection set. A selection set can consist of a single object, or it can be a more complex grouping. In order to select members in plan view or 3D view, make sure that properties ...

• Wind and Storey Loads

  Lateral loads can be applied at each floor level of the analysis model, or individual Column/Wall nodes (Joint loads that can be assigned to individual columns/walls are not limited only to lateral loads). You can use the “Wind and Storey Load” to ...