Performance Based Design and Assessment with ProtaStructure

Performance Based Design and Assessment with ProtaStructure 2019

Topics:


  1. Modeling of Existing Buildings
  2. Selection of Seismic Parameters correctly
  3. Corrosion Factors
  4. Overview of Assessment Interface
  5. Building Information Level
  6. Rebar Realization Factors
  7. Examination of Assessment Reports
  8. Retrofitting
  9. ProtaStructure-OpenSees Integration
  10. Pushover Analysis
  11. Target Displacement
  12. Pushover Curve
  13. Nonlinear Time-History Analysis
  14. Ground Motion Scaling
  15. Definition of Material Nonlinearities
  16. Definition of Section Nonlinearities
  17. Member Plastic Rotations
  18. Limit Plastic Rotations
  19. Member Damage Regions
  20. Building Assessment
  21. Examination of Detailed Nonlinear Analysis Results


Host: Burak TÜRKER Civil Engineer/Test Engineer, Oğuz ZERMAN Civil Engineer/Software Developer


    • Related Articles

    • Performance Based Design and Assessment

      Performance-based design is a process that enables the development of structures that will have predictable performance when subjected to defined loading. Performance-based design (PBD) turns the traditional design paradigm upside down in the sense ...

    • Assessment & Performance-Based Design to Eurocode 8 Part 3

      Eurocode 8: Design of structures for earthquake resistance – Part 3: Assessment and retrofitting of buildings (EN 1998-3:2005) is a fundamental reference for the seismic evaluation of existing buildings. It provides a structured methodology for ...

    • How to install OpenSees to run non-linear analysis, Time History Analysis & Pushover Analysis

      ProtaStructure requires OpenSees to perform non-linear Time History Analysis & Pushover Analysis. If OpenSees is not installed, the program will show the warning as shown in the figure below: ProtaStructure 2025 & later Steps to install OpenSees: 1) ...

    • Target Displacement for Pushover Analysis

      The “Nonlinear Analysis” feature in ProtaStructure enables the user to perform nonlinear analysis methods such as Pushover Analysis and Time-History Analysis. In the attached documents, target displacement calculation for nonlinear pushover analysis ...

    • Displacement Based Assessment and Design with ProtaStructure Opensees Integration

      Displacement Based Assessment and Design is always challenging issue for structural engineers. ProtaStructure-OpenSees integration provides new features for non-linear analysis of structures. In the video that is given below, you will learn how to ...