ProtaStructure Pad Footing Design to TS500
Designing of Pad Footings with ProtaStructure is very easy.
We present ProtaStructure Pad Footing Design to TS500 to your attention with the hope that it will be useful. You can find this guide as a PDF file in the attachment.
Related Articles
Pad Footing
Before defining a Pad Footing: The building model must be completed and analysed, so that the column axial loads and moments are determined. The foundation storey 0 (ST: 0) must be set as the current storey. In order to determine concrete and steel ...
Pad Footing Details
General Pad footing detail drawing can be drawn using "Pad Footing Details". Unlimited numbers of pad footing can be generated with different display options on the same or different drawings. The pad footing detail drawing is based on detail ...
ProtaStructure Basic Training Guide
Thank you for choosing ProtaStructure. This Basic Training Guide aims to get you up and running quickly. Starting from an introduction to the interface, this guide explains how to create, analyze and design a model step-by-step. You should be able to ...
Design Pile Cap/ Pad Footing for Service Load (Unfactored Load)
The example below shows the step to design pile cap for service load (unfactored load). It is also applicable in designing pad footing as the steps are similar. First, manually create a unfactored load combination combination in Load Combination ...
Strip Footing
For a strip footing to be defined under a series of columns/walls, foundation beams must have been defined beforehand between the columns/walls. ProtaStructure performs the strip footing calculations for all load combinations and draws moment and ...