ProtaStructure Rib & Waffle Slab Loads Design Guide

• Related Articles

• Rib And Waffle Slab Loads

  Scope In this document, calculation and decomposition of loads on ribbed and waffle slabs are explained. Modelling and design of ribbed and waffle slabs are out of scope of this document. Method for Load Decomposition Automatic Decomposition in ...

• Yield Line and FE Load Decomposition with Example

  For your best understanding to this topic, it is best to refer and relate to Modelling, Analysis & Design Flowchart before proceeding with this article. There are two methods to calculate concrete slab loads onto supporting reinforced concrete beams ...

• ProtaStructure Basic Training Guide

  Thank you for choosing ProtaStructure. This Basic Training Guide aims to get you up and running quickly. Starting from an introduction to the interface, this guide explains how to create, analyze and design a model step-by-step. You should be able to ...

• Ribbed Slab Modelling & Design Procedure

  Similar to ordinary slab plates, Ribbed/Waffle slabs can be analyzed separately from building under G and Q, or with the building model under all combinations. Ribbed /Waffle slabs must be analyzed using FE Approach. Modelling Procedure: Insert ...

• Flat Slab Modelling, Analysis and Design

  This design guide discusses the modeling, analysis and design of flat slab model in detail at here: Flat Slab Training Manual Users who wish to understand the modeling, analysis and design for flat slab model are recommended to read this document.