Seismic Design of Cast-in-Place Concrete Diaphragms to TBDY2018

Seismic Design of Cast-in-Place Concrete Diaphragms to TBDY2018

This document represents the analysis steps of the slab members according to TBDY 2018 Section 7.11 that should be checked in ProtaStructure under the impact of seismic force. In addition, slab modeling steps, design requirements, reporting of analysis results and explanation for selected seismic codes are also included in this document.

We present this design guide to your attention with the hope that it will be useful. You can find the guide as a PDF file in the attachment.

    • Related Articles

    • ProtaStructure Basic Training Guide

      Thank you for choosing ProtaStructure. This Basic Training Guide aims to get you up and running quickly. Starting from an introduction to the interface, this guide explains how to create, analyze and design a model step-by-step. You should be able to ...

    • Seismic Analysis to Indonesia SNI 1726 : 2019

      ProtaStructure can now calculate seismic loads in accordance with Indonesia (SNI 1726 :2019 ) seismic code, which is an adaptation of ASCE07. After selecting the Earthquake Code via Parameter in Building Analysis dialog > Pre-analysis tab, pick ...

    • Seismic Separation Design according to ASCE7-16

      ProtaStructure determines the seismic separation condition according to ASCE 7-16 Clause 12.12.3. In this document, calculation details about seismic separation conditions are explained. We present this design guide to your attention with the hope ...

    • Seismic Separation Design according to EC8

      ProtaStructure determines the seismic joint condition according to EC8 Chapter 4.4.2.7. In this document, calculation details about seismic joint condition are explained. We present this design guide to your attention with the hope that it will be ...

    • Seismic Design in ProtaStructure 2019

      Content: Specification of Seismic Parameters Calculation of Mass • Eigenvalue Analysis Equivalent Static Load Method Mode-Superposition Method Two-stage Analysis Building Base and Height Check Stiffness Modifiers Vertical Earthquake Effects ...