Seismic Separation Design according to ASCE7-16

Seismic Separation Design according to ASCE7-16

ProtaStructure determines the seismic separation condition according to ASCE 7-16 Clause 12.12.3. In this document, calculation details about seismic separation conditions are explained.

We present this design guide to your attention with the hope that it will be useful. You can find the guide as a PDF file in the attachments.
    • Related Articles

    • Seismic Separation Design according to EC8

      ProtaStructure determines the seismic joint condition according to EC8 Chapter 4.4.2.7. In this document, calculation details about seismic joint condition are explained. We present this design guide to your attention with the hope that it will be ...
    • Assessment & PBD to ASCE/SEI 41

      ASCE/SEI 41-17—“Seismic Evaluation and Retrofit of Existing Buildings”—is the industry standard for assessing seismic performance in existing structures. Moreover, it uses performance-based design principles. Consequently, the standard defines a ...
    • Seismic Design in ProtaStructure 2019

      Content: Specification of Seismic Parameters Calculation of Mass • Eigenvalue Analysis Equivalent Static Load Method Mode-Superposition Method Two-stage Analysis Building Base and Height Check Stiffness Modifiers Vertical Earthquake Effects ...
    • Seismic Analysis to Indonesia SNI 1726 : 2019

      ProtaStructure can now calculate seismic loads in accordance with Indonesia (SNI 1726 :2019 ) seismic code, which is an adaptation of ASCE07. Go to Building Analysis dialog > Pre-analysis tab : Click on Settings Center > Code section will be shown > ...
    • Beam-Column Joint Shear Design and Strong Column Weak Beam Checks

      For 2021 and prior versions, Beam-Column Joint Shear Design and Strong Column Weak Beam condition checks were given in the same report which is Post-Analysis Design Checks Report. With ProtaStructure 2026, Beam Column Joint Shear Design and Strong ...