ProtaStructure : Re-Label Members

Re-Label Members

The “Member Re-labelling Option” can be found in “Review” tab to re-assign the member labels for particular member groups.

Members can be re-labelled pressing “OK” button after selecting one or more member groups.


Members

You can check the member groups to be re-labelled using the check-boxes in this section.

Storeys

Using the dropdown lists in this section, you may re-label only the members in the range defined by “First Storey” and “Last Storey”. For re-labelling the members in a single storey, you can select the same storey in both lists.

These lists are disabled when “All Storeys” box is checked.

Sort Reference

Member labels can be sorted based on the available references provided in this section.
  1. “Left-Top --> Right-Bot”
    1. The member numbers will start from the upper left corner of the plan and increase from left to right and top to bottom.
  2. “Right-Top --> Left-Bot”
    1. The member numbers will start from the upper right corner of the plan and increase from right to left and top to bottom.
  3. “Left-Bot --> Right-Top” and “Right-Bot --> Left-Top” options
    1. They are analogous with above item 1 and 2. 
  4. “Sort Row wise”
    1. Member labels will increase first horizontally (along x-axis) then vertically (along y-axis).
  5. “Sort Column wise”
    1. Priority will be along y-axis.
  6. “Group Members by Direction” 
    1. Only applicable to beams and wall members. When this option is checked, horizontal beams will be labelled first.
  7. “Reference Angle”
    1. To identify the direction of the horizontal beams. When Reference Angle is zero, then horizontal beams are along global X-axis.
Group Cantilever Slabs Separately

Occasionally you may want to label the cantilever slabs after finishing labelling the standard panels. In this case, “Group Cantilever Slabs Separately” option must be checked.

Labelling Options

Several options in this section are provided to increase the flexibility of the re-labelling operation.

Retain Compatible Labels Between Storeys

If this option is checked, members that are at the same insertion in different storeys are labelled using the same member number.
For example, all columns in axis intersection B and 12 are numbered using the same number, say 25. In this case, the labels of this column will be 1C25, 2C25, 3C25 etc.
The bottom-most storey members used in “Storey” section are used as reference members in this option. In this case, the members which does not exist in the bottom-most storey will be labelled after finishing all members in that storey.
This option is only valid if more than one storey at a time is selected for re-labelling.

Member Number Start Value

Labels of members will be started using the value specified in this field. This is useful when the project consists of more than one block and unique member numbers are used.

Modify Prefix Character

A prefix character can be added in front of the member label. For example, Prefix "H" and beam label "1B2", results shall be "H1B2".
  1. Define Direction-Dependent Prefix allows horizontal member and vertical member to have different prefix.

Modify the Postfix

A postfix character can be added in behind of the member label. For example, Prefix "C" and beam label "1B2", results shall be "1B2C".


    • Related Articles

    • Model Options

      Options to be used in analysis can be specified in “Model Options” page of “Building Analysis” form. “Model Options” comprises of four tab pages namely, Model, Shear Wall Model, Slab Model, and Settings. Any modifications made in this page can be ...

    • Display and Edit Member Properties

      Member Properties can also be accessed by right-clicking after selecting an existing member and choosing the “Properties” or “Select and Load Properties” in the shortcut menu. Properties of the selected member will be loaded. Alternatively, you can ...

    • Move Members to Axes

      All members are inserted based on the positions specified by axis intersections. If, for any reason, you have to modify the position of the axes, the members that are inserted based on these axes must also be updated. You can use the "Move Members to ...

    • ProtaStructure Basic Training Guide

      Thank you for choosing ProtaStructure. This Basic Training Guide aims to get you up and running quickly. Starting from an introduction to the interface, this guide explains how to create, analyze and design a model step-by-step. You should be able to ...

    • Creating Members with Mirroring

      The "Mirror" command can be used to facilitate the creation of the members in symmetrical buildings. After completing one part of the floor plan, the other part can be generated with the mirror command. To mirror the elements: Select/ Multiple-select ...