In Modelling & Detailing, there are several topics to be explain in detail here to allow users to have better understanding regarding the modelling technique and setting up different views/ workplane in ProtaSteel:
Techniques for member creation and loading are described in this section. Also described here are those other modelling related functions contained on the “Member” pulldown. Additional modelling related topics can be found in the preceding Graphic ...
The analytical model of the structure is created in the Graphic Editor, either in a 2D plan view, or in 3D. In order to prepare the model efficiently you are advised to have an understanding of the topics described in this section and the subsequent ...
Design settings of slabs are explained in detail in the following sections. Slab Analysis and Design Procedure Analytical Strip (Moment Coefficient Method) Finite Element FE Strip Ribbed Slab Modelling & Design Procedure Column Punching Check How to ...
ProtaStructure Suite is an all-in-one structural engineering software providing a wide range of tools and features. This may sound a bit confusing at first. However, it's not! This webinar shows you how to take advantage of this complex software ...
Column and Wall are the significant vertical structural members in a building structure. Column Reinforcement Design Tab can be loaded by selecting the "Columns" under the Design tab. Design settings of columns and walls are explained in detail in ...