Beam Section Design
Reinforced Concrete Beam Long Term Deflection Check
ProtaStructure supports long-term detailed RC beam deflection checks according to the following design code : America Code : ACI318-2014, ACI318-2019 Columbia Code : NSR10-C Indian Standards : IS456-200 Indonesia Code : SNI2847 Peru Code : NTE060 ...
Beam Section Design Table - Grouping Tab
General Beam Section Design Table allows user to review or design all the beams in table. To access Beam Section Design Table, user can only go to "Design, then click on "Section Design" under Design tab. Beam Section Design Table consists of two ...
Beam Section Design Table - Design Tab
General Beam Section Design Table allows user to review or design all the beams in table. To access Beam Section Design Table, user can only go to "Design, then click on "Section Design" under Design tab. Beam Section Design Table consists of two ...
Beam Section Design - Rebar Tab
General Beam Section Design allows user to access beam reinforcement data, beam report and etc. To access Beam Section Design, user can either: Select a beam, then click on "Section Design" under Beam tab, or Select a beam, right click to access ...
Beam Section Design - Beam Tab
General Beam Section Design allows user to access beam reinforcement data, beam report and etc. To access Beam Section Design, user can either: Select a beam, then click on "Section Design" under Beam tab, or Select a beam, right click to access ...
Beam Section Design Overview
Beam design will be discussed here. Before that, please take note that Building Analysis must always be performed and completed without error (some warnings that create in purpose and do not affect the result can be ignored) and building behaviour ...
Curve / Circular Ramp Beam Example
You can model a ramp beam / ring beam. Circular ramp/spiral slab is beyond the scope of the program. Attached a sample modelling for your references only. Generally, it is recommended that separate the model of circular ramp / spiral staircase from ...
Ignorable Forces for Beam Design
The beam forces that are automatically designed for in the beam section design are Major Bending Moment, Major Shear Force & Torsion. The beam forces that are not automatically designed for (or even checked) are Axial Tension Force, Minor Axis ...