Settings Center Overview

Below are the topics of Settings Center, click the title of the topics will navigate you to the article:

1. Environment Settings : 
   
1. ProtaStructure Environment
2. ProtaDetails Environment
   
2. Project Settings / Parameters 
3. Design Settings : 
   
1. Column & Shearwall Design Settings
   
2. Beam Design Settings
   
3. Slab Design Settings
4. Foundation Design Settings
5. Stairs Settings (For ProtaDetails Design Library)
6. Retrofit Wall Settings (For ProtaDetails Design Library)
   
7. Steel Design & Composite Member Settings
8. Analytical Model Settings
9. Load Editor Settings
   
4. Building Assessment
   
5. Drawing Settings
   
6. Template Management
   

Miscellaneous : 

1. Layer and Color Settings

• Related Articles

• Building Analysis Overview

  Having modeled your structure and defined the parameters/loading to be applied, you are now ready to generate the member design forces. These are determined by performing a 3D analysis of the whole building. The pre and post analysis stages, along ...

• Structural Modelling Overview

  Techniques for member creation and loading are described in this section. Also described here are those other modelling related functions contained on the “Member” pulldown. Additional modelling related topics can be found in the preceding Graphic ...

• Graphical Editor Overview

  The analytical model of the structure is created in the Graphic Editor, either in a 2D plan view, or in 3D. In order to prepare the model efficiently you are advised to have an understanding of the topics described in this section and the subsequent ...

• Visibility Settings and Selectability Settings

  Visibility settings allows user to show and hide elements that wish to hide/show in the drawings, while selectability settings allows user to lock the elements and prevent from misclick or accidentally deleting the elements. Both Visibility and ...

• Column and Wall Design Overview

  Column and Wall are the significant vertical structural members in a building structure. Column Reinforcement Design Tab can be loaded by selecting the "Columns" under the Design tab. Design settings of columns and walls are explained in detail in ...