Steps and basic guideline of generating drawing can be referred to ProtaDetail Basic Training Guide. The best practice is to complete the quick start guide before proceeding to this topic.
In these articles will explain on the details of each drawing generation functions such as below:
General Form Plans can be drawn for different scenarios. Unlimited numbers of form plans can be generated with different display options on the same or different drawings. Dialog is composed of 3 parts: Storeys : Select stories to be generated ...
General Pad footing detail drawing can be drawn using "Pad Footing Details". Unlimited numbers of pad footing can be generated with different display options on the same or different drawings. The pad footing detail drawing is based on detail ...
General Important information of columns such as reinforcement, dimensions, quantity table etc. can be included in Column Application Plans. Dialog is composed of 3 parts: Storeys : Select stories to be generated Detailing Options : Select the ...
General Storey Beam elevation can be drawn using "Storey Beam Elevation Drawings". Unlimited numbers of beam elevation drawings can be generated with different display options on the same or different drawings. Dialog is composed of 3 parts: Storeys ...
Before defining a Pad Footing: The building model must be completed and analysed, so that the column axial loads and moments are determined. The foundation storey 0 (ST: 0) must be set as the current storey. In order to determine concrete and steel ...